Anna 38.5" 5-light Metal/Glass LED Linear Pendant, Oil Rubbed Bronze

JYL7414A

Description

A classic hanging lantern pendant is made modern by the geometric angles of the caging on this decorative piece. Perfect for a dining table or kitchen island, you can adjust the drop according to your desired height — from a minimum of 28" to a maximum of 100" inches. And if regularly getting on a ladder to change bulbs isn't your thing — this fixture is compliant with LED bulbs which can go years between replacements.

  • Eye-catching and geometric, the geometric angles and dark finish of this pendant would be stunning in a dining room or kitchen
  • An adjustable drop allows you to hang this fixture at your desired height — from 15-39" from the ceiling
  • Takes five bulbs and compatible with any 9W LED or 40W Type "B" or 13W CFL
  • Eco-Friendly 4W LED bulb included
  • As this fixture must be hardwired, we recommend a professional electrician manage installation
  • ETL Listed

Item Specifications

  • Color w/ Shade: Oil Rubbed Bronze / Clear
  • Body Color: Black
  • Dimensions (W x D x H): 38.50" x 8.25" x 15.00"
  • Material: Metal/Glass
  • Metal Type: Iron
  • Metal Finish: Oil Rubbed Bronze
  • Cord Material: Plastic
  • Cord Color: Black/White
  • Cord Length: 6.00"
  • Bulb Type: LED
  • Assembly Required: Yes

Care and Cleaning

FABRIC SHADES

Dust regularly with a feather duster or a soft dry cloth.
To remove dirt and grime use a lint brush or fi ne bristle brush and rub gently.
Remove stains and accumulated dust using a soft white cloth or sponge and a solution of mild detergent and warm water.
Gently wash away the dirt or stain and then rinse with a clean cloth and fresh water. Allow the shade to dry in the sun or with the use of a hair dryer.

METAL BASES

Dust regularly with a feather duster or a soft dry cloth.
When more thorough cleaning is necessary, use mild soap and warm water and lightly wipe the surface using a soft white cloth. Rinse using fresh water and a soft white cloth to remove all soap residue. Dry thoroughly with a soft cloth.

RESIN AND PAINTED BASES

Dust regularly with a feather duster or a soft dry cloth.
Remove accumulated dirt by wiping the entire base with a soft clean cloth and a solution of warm water and mild soap. Rinse with fresh water and a clean cloth and then dry thoroughly using a soft clean cloth.

BRASS BASES

Brass lighting fixtures are protected with coat of clear lacquer to keep the finish from tarnishing, so brass polish is not necessary. Damage to this protective coating from harsh cleaning products may lead to a tarnished finish.
Dust regularly with a feather duster or a soft dry cloth.
To remove accumulated dirt use mild soap and warm water and lightly wipe the surface using a soft white cloth. Rinse using fresh water and a soft white cloth to remove all soap residue. Dry thoroughly with a soft cloth.

WOOD BASES

Dust regularly using a soft cloth or furniture duster.
Occasional treatments using lemon oil will prevent the wood from drying while also helping to preserve the luster of the finish. Apply a small amount of lemon oil to a clean cloth (do not put the oil directly on the wood base). Gently rub the oil over the entire surface of the wood base. Buff to finish with a soft clean cloth.

CERAMIC BASES

Dust regularly using a soft cloth or furniture duster.
When necessary, clean the base of your ceramic lamp using a soft clean cloth and a solution of mild soap and warm water. Wipe thoroughly, but gently, then rinse using a clean cloth and fresh cold water.

LEATHER BASES

Dust regularly using a soft cloth or furniture duster.
Avoid placing leather based light fixtures in direct sunlight
Occasional treatment using leather conditioner will maintain the look and prolong the life of your leather lighting fixture.

CRYSTAL BASES AND ACCENT PIECES

Dust gently on a routine basis using a feather duster.
Wipe the crystal surface and all accent pieces with a clean, soft cloth on a regular basis to maintain the brilliancy of the crystals.

OUTDOOR LIGHTING

Routinely wipe the exterior surface of outdoor lighting fixtures with a soft clean cloth.
Use glass cleaner to keep the glass clean and clear.
Car wax can be used on the metal surface to preserve and protect the finish of your outdoor lighting fi xture. Apply twice a year and follow the directions on the product.

MIRRORS

Dust regularly with a soft clean cloth or furniture duster.
To clean the mirror(s) use a soft cloth and mild solution of distilled white vinegar and warm water.
Do not use window cleaners that contain ammonia to clean mirrored lighting fixtures.

What's Inside

Every inspired JONATHAN Y design is created with discerning insight and uncompromising attention to detail. From the top of our shades to our shapely silhouettes and silky connections, JONATHAN Y is draped in fashion and glowing with the light of modern lifestyles.

OIL-RUBBED BRONZE

Oil-Rubbed Bronze is a metal finish created to simulate aged bronze. Appearing at first as a dark chocolate brown, its nuanced finish has an undertone of copper and ages beautifully in any space. Working well on modern or traditional designs, this finish is inspired by the past but equally modern.

CANDLE LED

Not only are our light fixtures designed with beauty in mind, but we're focused on energy-efficiency too -- the included LED bulb is proven to last longer, is more durable than glass bulbs, and produces a lovely warm glow when illuminated.

Get the inside scoop!